Flanges/Grommets for Suction Return Lines

Suction/Return Flanges and Grommets are designed to seal pipe or tube lines when passing through the top plate of a hydraulic reservoir or similar applications. Suction Flanges also allow access for removal of a suction element for inspection without draining the reservoir.

___________________________________________________________________________

Standard Features:

• Top and bottom mounting plates
• Internal washer the seals against the pipe/tubing and between the top/bottom plates
• Gasket to seal  between the bottom plate and the reservoir top plate on suction flanges. Return flanges use the internal washer seals the flange to the reservoir top plate
• (4) 5/16-18 thread forming screws on suction flanges
• (2) 1/4-20 thread forming screws on return flanges

Standard Material:

• Zinc plated carbon steel mounting plates
• Burn N rubber internal washer